Guide makes bobbin lace
 
Install the programmes in certain mapstructuur on the hard disk.
vb.:
c:\klos < - the map for the programmes
c:\klos\calc
c:\klos\calc\calc1 < - the mappen for calculations,
c:\klos\calc\calc2 temporary calculation outline files and
c:\klos\calc\calc3 index IO files
c:\klos\calc\3kl < - the map for calculation outline files
c:\klos\calc\lxt < - the map for export, import files
c:\klos\data
c:\klos\data\clc_a < - the mappen for project files and
c:\klos\data\clc_b unwieldly files (unti6 bijv.)
etc...
Open the programmes contourcalculator (green) exclusive 1x and
lopercalculator (roze) 
minimum 1x.
You can now in contourcalculator a menu find where you traffic-jam,
Edit and Window see standing.
You start a new project selecting File|New or the programme again to
start.
By means of Edit|Drawing you open an empty drawing in which the
version buds left on the window
to stand. By with the mouse concerning these buds moving you get in the title
beam of the programme
a short explanation.
A drawing can exist from several polylines by them signs after the bud
' Add lines\points ' at
have selected. Within the black framework you can points with the mouse and the
linkermuisknop (maximum 3000/v)
to put and eventually concludes the polyline by impression
lines\points ' again the bud ' Add.
The bud ' Edit the drawing ' gives to possibility the selected of
treating polyline.
You the polyline (s) have been possible ready then these by means of
Edit|Copy, then Edit|Drawing, then Edit|Paste by
piece becomes geexporteerd as.3KL.LXT.XET, or.DXF.
.3KL geindexeerde polyline which are to use in lopercalculator, give
someone a bad press.
Two manners are standard: Number, the indexing go by polyline point
Distance, the indexing gaar by lijnstuk length.
You can export polylines also two in a drawing as.3KL behind each other in provisions
combination. These can be used within lopercalculator its projection calculation.
.LXT give the possibility loose of exporting polylines and as polyline
to import.
Pay attention then to double points which you by means of the bud '
Edit the drawing|Delete superfluous points ' are possible
to remove.
.LXT reflect within lopercalculator the index IO. This is a file what the point position within
a projection stipulated.
.XET give resistant with coordinaat data to a text (Eurotrade).
.DXF give resistant with coordinaat data to a text (Corel Draw).
 
Lopercalculator give someone a bad press files in the directory (map)
where index IO file is
selected. This select file after File|Lopercalculation to have it has been
pressed and two
outlines (.3KL) to have chosen. Minimum necessary.LXT have the coordinaten of: 
0,0, <Enter>
360,360, <Enter>
<Enter>
<Enter>
<Enter>
to run. The first column (x-as) gives the index, novice as from 0 finishing on
360, of the points (N)
, the second column (y-as) reflects the index of the outline. By slaughtering IO now an index with
the x-as the point and that eventually numbering to multiply with
360/N is possible you a projection
simple drawing up. Pay attention to the direction of ash coordinaten, the y-as runs
positively to down.
By selecting directories now several by started up lopercalculator it
is possible
several calculations to start.
Dialogue window what starts cursor calculation must be filled in with
regard to
ash size a [ 1000 ], or the use of AB factor with Fab [ 1 ] (a
corresponds to the x-as.
b with the y-as).
Fd [ 1 ] give a multiplying factor for d [ 0 ], the second outline
verkleiner.
L [ 100 ] changes the invoerberekeningsspeldenafstand. Dec.Prec. [ 2 ] the precisie changes of
calculation (vb.: log(100) (=2) gives +/- gives 1/100, unwieldly (50) +/- 1/50).
N [ 60 ] changes the number of points in the firstly selected outline.
[ x ] Radial stipulated lopercalculatie with type zigzag [ 2 ].,1 =
both cursor legs in use
2 = one cursor leg, 3 = other cursor leg.
[ ] Radial give to a minimum distance calculation, also with type
zigzag 1.2 or 3 to use.
Outside edge dx, dy [ 0, ].0 ] moves the firstly selected outline,
Binnenrand dx, dy [ 0, ].0 ] move the Second selected outline.
[ ] projection gives [ x][ ] calculation to Radial,
[ x ] projection with [ x ] Radial gives calculation to projection.
[ x ] behind each other.3KL indicates that.3KL polylines contain which lie behind each other, use an even n.
[ ] behind each other.3KL demands.3KL with the polylines coordinaten for and for placed.
Some polyline (outline) offer other possibilities at last option.
The first selected outline for a projection must a circle or square
(quadrantische quantity
punten) are as a result of which those are indexes are carried out to
for example behind each other.3KL.
Dialogue window can be concluded with [ okay ] as a result of which
calculation starts.
Calculation is at beinvloeden with the spatiebalk, F1, F2, grapples
and a random test.
Spatiebalk accelerates the jump to new ash size,
Random test slows down the jump,
F1 the step reduces size for the assen jumped,
F2 increased the step size,
Stops calculation grapples prematurely.
At end calculation a text appears whereupon there resistant Unti6,
files in the index IO directory
have been given someone a bad press. These files are import File|Import|LXT|Untis within contourcalculator.
Unti1 the cursor gives,
Unti1b gives the index IO of outside - and binnencontour,
Unti1c the index IO of the outside outline gives (first.3KL),
Unti1d the index IO of the binnencontour gives,
Unti2 gives firstly selected.3KL,
Unti3 the Second gives selected.3KL,
Unti4 gives all export distanceexport distances sorted,
Unti4b gives the first outline is export distanceexport distances,
Unti4c gives the second outline is export distanceexport distances,
Unti4d the one cursor leg length gives,
Unti4e the other cursor leg length gives,
Unti5 the iteratie give course of b (y) - ash.
In Unti6.TXT stand what information over rack time and ash size, but also a
number 1/F 
what is use to reach the invoerspeldenafstand within for example
unti1.
This is by the bud do ' Change the Unit rectangle ' and then the
number behind 1/F in both
professions at copy-pasten and to carry out.
After for having unti1 the geschaald are possible you a framework the
cursor to lay (a4 bijv. 200x280 mm)
and the polyline label none as Prn, each poyline deserve print a
label.
You can give someone a bad press now the project (also earlier) with
File|Save|All.
All windows except the windows to print, whereupon you must be
minimised 
File|Print|Desktop can press. You can now a print and/or.BMP (in the export map) make.
The number of pixels what you sail in depends on the printer forks and
ensures the DPI.
x [ 4000 ] and y [ 5700 ] provides on an a4 for and close 500 DPI. (134.217.728 the maximum printermatrix are).
Several.BMP in a map can become compared to lopercalculator File|BMP Compare,
this gives 
list with numbers between 0 and 1.,1 does not correspond and 0.
You should make no BMP agreement then are possible you.DXF load file for a heaviness point at
to calculate. With the linkermuisknop (or <Enter>) a dialogue window can you
on the drawing, whereupon you click
see zwx = with the text... and zwy =.... These numbers are possible you left in the contourcalculator
its drawing turns off with a rectangle. Pay attention, however, that the zwx in the y direction and the zwy in
x-richting
are used.
Furthermore with the rechtermuisknop the drawing can see you increased
and put back, in the increased implementation
you can with linkermuisknop left or Right in the window clicks for a
previous or next drawing at
to select this is also reached with the cursortoetsen, <Del>
asks for disposal of.DXF.
 
thuisgebruik:
 0.3 euro by copy for 10.000, - euro annual salary
 3, - euro by copy for 100.000, - euro annual salary
 ...
further sale:
 90% of verkoopprijs (>0 euro)
 
extra cost to purchaser!
to price validly till 31-12-2005, if not modified after course used
permanent.
 
H.J. of of the garden
Beilen (the Netherlands)
Postbankgiro: 5560553
IBAN:NL27 PSTB 0005.5605.53
BIC:PSTBNL21